Dental Cements

Product Details:

Product Details

Used as cavity filling cement.

Composition / Information on Ingredients (% chemical components by WT)

Distilled water - 10- 20 %

Poly Acrylic acid - 10- 20 %

Calcium Aluminium oxide Powder – 70- 100%

Silver Alloy- > 50%

Packaging

Liquid: 10 ml, Powder: 15 Gms

Product Details:

GC Gold Label 9 Extra 1-1 Pkg (Glass Ionomer Cement Regular Pack 5gm , 3 gm):-
GC 9 EXTRA GOLD LABEL GLASS IONOMER CEMENT 
Product Details :-

• GC Gold Label 9 is the easy-to-use, handle and place fluoride-releasing alternative to expensive compomers and composites and in many cases, amalgam.
• It cures extremely hard and is very wear resistant. 
• It''''s the perfect product for geriatric and paediatric restorations, final restorations (non-stress bearing areas), Intermediate Restorative (IRM), core material and long-term, temporary restorations.
• Chemical adhesion to tooth structure allows minimal cavity preparation without the need for etching or bonding agents
• Chemical setting without shrinkage allows single-step placement without layering
• Similar thermal expansion as tooth structure produce minimal stress on the marginal seal
• Strontium based glass provides good radiopacity and snap-set characteristics unanimously preferred by clinicians
• Strontium based fluoride releasing formulation contributes to internal remineralization within tooth structure as well as increasing surface strength over time
• High compressive and flexural strength, and 60% higher wear resistance than conventional glass ionomers makes Gold Label 9 strong enough for use in posterior teeth.

Benefits :-

1. Benefits of GC Gold Label Light Cured Universal Restorative 2
2. Benefits of GC Gold Label 1
3. GC Flexceed Vinyl Polysiloxane Impression Material
4. Luting and Lining Ionomers - GC Gold Label 9 Posterior Restorative

FEATURES :-

• Extra fluoride release
• Extra fast setting yet with ample working time.
• Extra translucency for improved aesthetics.
• Strontium-based glass ionomer restorative.
• For good radiopacity and snapset characteristics.
• Strontium will mimic calcium in the formation of strontium hydroxyapatite and strontium fluoroapatite to affect internal remineralization within the tooth structure.
• Research has shown that a strontium-based glass ionomer placed in calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer surface achieving a surface strengthening effect.

• High Strength
• Radiopaque
• Posterior GIC
• Chemical setting without shrinkage
• Similar thermal expansion as tooth structure
• Strontium based fluoride releasing formulation

Product Packaging :-

1x GC Gold Label 9 Extra 1-1 Pkg

Product Details:

GC Gold Label 9 Extra 1-1 Pkg (Glass Ionomer Cement Regular Pack 15gm , 10 ml ):-
GC 9 EXTRA GOLD LABEL GLASS IONOMER CEMENT 
Product Details :-

• GC Gold Label 9 is the easy-to-use, handle and place fluoride-releasing alternative to expensive compomers and composites and in many cases, amalgam.
• It cures extremely hard and is very wear resistant. 
• It's the perfect product for geriatric and paediatric restorations, final restorations (non-stress bearing areas), Intermediate Restorative (IRM), core material and long-term, temporary restorations.
• Chemical adhesion to tooth structure allows minimal cavity preparation without the need for etching or bonding agents
• Chemical setting without shrinkage allows single-step placement without layering
• Similar thermal expansion as tooth structure produce minimal stress on the marginal seal
• Strontium based glass provides good radiopacity and snap-set characteristics unanimously preferred by clinicians
• Strontium based fluoride releasing formulation contributes to internal remineralization within tooth structure as well as increasing surface strength over time
• High compressive and flexural strength, and 60% higher wear resistance than conventional glass ionomers makes Gold Label 9 strong enough for use in posterior teeth.

Benefits :-

1. Benefits of GC Gold Label Light Cured Universal Restorative 2
2. Benefits of GC Gold Label 1
3. GC Flexceed Vinyl Polysiloxane Impression Material
4. Luting and Lining Ionomers - GC Gold Label 9 Posterior Restorative

FEATURES :-

• Extra fluoride release
• Extra fast setting yet with ample working time.
• Extra translucency for improved aesthetics.
• Strontium-based glass ionomer restorative.
• For good radiopacity and snapset characteristics.
• Strontium will mimic calcium in the formation of strontium hydroxyapatite and strontium fluoroapatite to affect internal remineralization within the tooth structure.
• Research has shown that a strontium-based glass ionomer placed in calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer surface achieving a surface strengthening effect.

• High Strength
• Radiopaque
• Posterior GIC
• Chemical setting without shrinkage
• Similar thermal expansion as tooth structure
• Strontium based fluoride releasing formulation

Product Packaging :-

1x GC Gold Label 9 Extra 1-1 Pkg

Product Details:

Zinc Phosphate Cement

Product Details:-

Zinc Phosphate cement is a two component product i.e powder and liquid, Which contains inorganic metal salts and phosphoric acid respectively.

Application:-

Zinc phosphate cement is used for Cementations of crowns, bridges, inlays and orthodontic brackets.

Cavity lining under all restorative materials temporary fillings, direct or indirect pulp capping.

Composition:-

Powder- Zinc oxide , Magnesium oxide, Strontium Chloride, Tannic acid , Liquid €“Ortho phosphoric acid and excipients.

Packing:-

1 x 30g powder jar, 1 x 15ml Liquid, 1 x spoon, 1x Mixing pad

Shelf Life:-

3 years from the date of Manufacturing.

Product Details:

Product Detail

Alginate Impression Material is a natural seaweed based powder with new dust free formulation. It is suitable for molding complete items, soft or delicate objects or the human body.  Alginate powder is Regular Set, Dust Free with Spearmint Aroma.

Extremely good water-powder affinity
Dust free and lead free
Highly elastic with excellent elastic memory
Easier and quicker to mix without bubbles or inconsistencies
Pleasant mint taste with no excessive salivation, which is liked by patients or users
Idea thixotropic properties so it easily under light pressure without causing gagging
Excellent adhesion to hydro-colloid materials

Application

Impressions for restorations like inlay, crowns, bridges, dentures, and orthodontic applications
Study models and general impression taking techniques used in dentistry as well as other Opposing dentition
Also used for baby hand impressions and in other molding techniques

Composition

Food grade sodium alginate, calcium sulfate , sodium fluoride, Fillers, Flavor Color & excipients

Packing

1 x 226 gms Aluminum vacuum sealed pouch

Shelf Life

2 years from the date of Manufacturing.

Product Details:

Product Detail

OBTUROOT ( Root Canal Obturation Cement ) is a radiopaque, non-resorbable Zinc Oxide-Eugenol based root canal sealer. Its composition is well tolerated by the tissues and provides antiseptic, anti inflammatory and germicidal action. Excellent anti inflammatory properties due to the presence of Hydrocortisone Acetate .

Application

Permanent Root canal filling and sealing in association with gutta percha point.

Composition

Powder contains: Zinc Oxide, Hydrocortisone Acetate , Barium Sulphate, Thymol Iodide, Magnesium Stearate.

Liquid contains: Eugenol & Exceipents.

Method of Use

Mix carefully for approximately 45-60 seconds, one scoop of powder and five drops of liquid to obtain a thick mix, which can easily be introduced into the canal with suitable root canal filler, or in conjunction with a silver, acrylic or gutta percha point. Net setting time is 45-60 minutes from start of mix.

Packing

15g Powder, 10ml Liquid, 1 x powder Spoon, 1 x Dispensing Dropper and 1 x Mixing Pad.

Shelf Life

3 years from date of manufacturing.

Product Details:

Polycarboxylate cement is a two component product i.e. powder and liquid, Which contains inorganic metal salts and polyacrylic acid respectively.

Application:-Used for Cementation of crowns, bridges, inlays and orthodontic brackets. Cavity lining under all restorative materials also used for temporary fillings such as direct or indirect pulp-capping, the cement causes little or no pulp irritation, even when applied on freshly cut dentine.

Composition: Powder Zinc oxide, Magnesium oxide, Strontium Chloride, Tannic acid, Liquid Poly acrylic acid.

 

 

Product Details:

Glass Ionomer Cement Type I is based on radiopaque fine glass powder and organic polymer liquid used as luting material with excellent tooth adhesion properties having high fluoride release and flow ability.

Application:

• Cementation of metal-based inlays, inlays crown and bridges.
• Cementation of high strength (Zirconium based) all ceramic crowns and bridges.
• Cementation of stainless steel crowns
• Attachment of metal orthodontic bands

 

 

Product Details:

Product Detail

Alginate Impression Material is a natural seaweed based powder with new dust free formulation. It is suitable for molding complete items, soft or delicate objects or the human body.  Alginate powder is Regular Set, Dust Free with Spearmint Aroma.

Extremely good water-powder affinity
Dust free and lead free
Highly elastic with excellent elastic memory
Easier and quicker to mix without bubbles or inconsistencies
Pleasant mint taste with no excessive salivation, which is liked by patients or users
Idea thixotropic properties so it easily under light pressure without causing gagging
Excellent adhesion to hydro-colloid materials

Application

Impressions for restorations like inlay, crowns, bridges, dentures, and orthodontic applications
Study models and general impression taking techniques used in dentistry as well as other
Opposing dentition
Also used for baby hand impressions and in other molding techniques

Composition

Food grade sodium alginate, calcium sulfate , sodium fluoride, Fillers, Flavor Color & excipients

Packing

1 x 1126 gms Aluminum vacuum sealed pouch

Product Details:

GC Fuji 2 Gold Label Universal Restorative Glass Ionomer Cement Mini Pack:-
CONTENTS:- 1 Jar of 10 gm. Powder1 Jar of 5.6 ml. Liquid1 mixing spoon
DESCRIPTION:- 

• Universal Restorative 1-1 Mini pack.
• Radiopaque glass ionomer Restorative cement.
• Chemical adhesion to tooth structure allows minimal cavity preparation without the need for etching or bonding agents. 
• Chemical setting without shrinkage and similar thermal expansion as tooth structure offers an excellent marginal seal.
• Strontium based glass provides good radiopacity facilitating post-operative diagnosis.
• Low solubility for more durable and longer lasting restorations.
• Long term clinical success.
• Long term clinical success.
• Tooth-like coefficient of thermal expansion.
• High fluoride release Easy post-operative diagnosis.
• Easier mixing and sharper setting makes it so easy to use.
• Final finish may be completed under water 15 minutes from start of mix.
• Good color to Matches to natural tooth structure.
• More durable, longer lasting restorations.

Product Details:

GC Fuji 2 Gold Label Universal Restorative Glass Ionomer Cement Regular Pack:-
A Strontium-based Glass Ionomer:-

All GC Gold Label Glass Ionomer contains strontium glass. The strontium glass provides good radiopacity and snapset characteristics, unanimously preferred by clinicians around the world. Interestingly, strontium will mimic calcium in the formation of strontium hydroxyapatite and strontium fluoroapatite to affect internal remineralization within the tooth structure.

Surface Strengthening Effect:-
Research has shown that a strontium-based glass ionomer placed in calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer surface achieving a surface strengthening effect. All GC Gold Label Glass Ionomer strengthens over time in saliva.

A Consistent Predictable Seal:-
All GC Gold Label Glass Ionomer will display a glossy surface after mixing. This indicates sufficient free polyacrylic acid is available to begin the ion exchange process. The subsequent movement of ions between dentin, enamel and GC Glass Ionomer creates an ion exchange zone which chemically fuses them together. The resulting seal is consistent, predictable and long lasting.

BENEFITS :-

• Allows minimal cavity preparation.
• Less stress on margins and marginal seal.
• Protects against secondary caries.
• Promotes internal remineralization and surface strengthening.
• Easy post-operative diagnosis.
• Easier mixing and sharper setting makes it so easy to use.
• Final finish may be completed under water 15 minutes from start of mix
• Matches to natural tooth structure.
• Good colour match to tooth structure.
• More durable, longer lasting restorations.
• Assurance of successful restorations.

FEATURES :-

• Chemical bond to tooth structure.
• Tooth-like coefficient of thermal expansion.
• High fluoride release.
• Strontium based.
• Good radiopacity.
• Excellent handling characteristics.
• Reduced moisture sensitivity.
• Translucent material.
• Range of 3 shades: #21 Pale Yellow, #22 Yellow Brown and #23 Dark Gray.
• Low solubility.
• Long term clinical data.

CONTENTS :-

• GC Fuji Restorative Cement Gold Label Type 2.

Product Packaging :-

Powder : 15gm

Liquid : 8ml

Product Details:

GC Gold Label 1 Luting and Lining 1-1 Pack (8 ml Liquid, 15gm Powder):-

A Strontium-based Glass Ionomer:-

 
All GC Gold Label Glass Ionomer contains strontium glass. The strontium glass provides good radiopacity and snapset characteristics, unanimously preferred by clinicians around the world. Interestingly, strontium will mimic calcium in the formation of strontium hydroxyapatite and strontium fluoroapatite to affect internal remineralization within the tooth structure.

Surface Strengthening Effect:-

 
Research has shown that a strontium-based glass ionomer placed in calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer surface achieving a surface strengthening effect. All GC Gold Label Glass Ionomer strengthens over time in saliva.

A Consistent Predictable Seal:-

 
All GC Gold Label Glass Ionomer will display a glossy surface after mixing. This indicates sufficient free polyacrylic acid is available to begin the ion exchange process. The subsequent movement of ions between dentin, enamel and GC Glass Ionomer creates an ion exchange zone which chemically fuses them together. The resulting seal is consistent, predictable and long lasting.

 

 

 

• No surface preparation or bonding agent required
•  High mechanical strength
•  Film thickness of just 15 microns
•  Easy post-operative checks

Packing :-
GC Gold Label 1 1-1 PKG (10g Liquid, 15g Powder)

 

How to Use Gold Label 1

• Mix to the correct powder:liquid ratio (20 seconds for Gold Label 1)
• Apply the mixed cement to both restoration and prepared tooth
• Seat the restoration within 30 seconds of completing the mix
• Remove the excess cement during the gel stage
• Total setting time is 4’30” after start of mix
• After final set, moisture proof the margin by applying a final coat of GC Fuji Varnish or GC Fuji Coat LC

• Cementation of stainless steel crowns and orthodontic bands
• Final cementing of metal or porcelain fused to metal crowns and bridges
• Lining under restorative materials

• No surface preparation or bonding agent required, yet have exceptional retention properties
• Biocompatible and with a tooth-like coefficient of thermal expansion maintaining the marginal seal
• Protection from secondary caries
• Sufficiently strong for routine luting and lining requirements
• Easier to mix resulting in an smooth ultra creamy mix
• Excellent flow and complete seating of the crown, bridge or orthodontic band and the ideal viscosity for lining
• Easy post-operative checks
• Less chairside stress for both patient and dentist
• More durable, longer lasting marginal seal
• Excellent radiopacity
• Long-term fluoride release

• Intrinsic chemical adhesion to both tooth structure and metal
• Glass Ionomer formulation
• Fluoride release
• High mechanical strength
• Excellent wetting properties
• Film thickness of just 15 microns
• Radiopaque
• Biocompatibility
• Sharp set characteristics
• Low solubility
• Long term clinical data

Product Details:

RESTORATIVE+ Glass Ionomer Cement Type II is a radiopaque glass powder and organic polymer liquid Application: Glass Ionomer Cement Type II is used for restoration of primary teeth core build up and restoration of class III, V and limited class I cavities.

Application:-

• Permanent class III, class V restorations and small class fillings
• Restorations of smaller lesions
• Primary teeth fillings
• Fissure sealing
• Filling of cervical erosions
• Fillings prior to crown preparations

 

Product Details:

Root Canal Cleaner - 15 ml

Product Details:-

R.C.Clean is based on natural substances and therefore it does not cause irritation to oral mucosa and peri-apical tissue.

Application:-

R.C.Clean is used for removing gutta percha and Zinc Oxide-Eugenol Cement at the time of root canal retreatment and also as a cleaner for endodontic instruments.

Composition:-

Main active ingredient in R.C.Clean is d-Limonene oil which is a natural substance extracted from orange oil.

Packing:-

1x15 ml glass bottle

Shelf Life:-

2 years from the date of Manufacturing.

Product Details:

Product Description

General Laboratory Natural stone
for acrylic occluding models and bases. Good fluidity and low expansion.

Product Details:

Product Details

PYRAX Chromatic alginate is a normal setting chromatic alginate with MINT flavor and is indicated for removable prosthesis, study models, antagonists in fixed and removable prosthesis. The property of a gel substance to exhibit fluid characteristics upon manipulation and to return to a semi-solid state is high in all PYRAX Alginates .

The color changing property , easy mixing homogeneous mass, smooth, compact surfaces , dust free and fast setting property along with pleasant mint flavor makes it suitable for use in pedodontics also.

Three-phase chromatic alginate

• Dark Orange phase: mixing time (Mixing Time 45 seconds)

• Light orange phase: working time (Max. Working Time 1 minute 35 seconds)

• Yellow phase: time in mouth (Time in Mouth 60 seconds)

PYRAX offers a wide range of high quality Alginate impression materials, engineered to meet each professionals specific requirements.

PACKING: 1X 1126 Gms Aluminum vacuum sealed pouch

SHELF LIFE: 2 years from the date of manufacturing.

Product Details:

GC Gold Label 1 Luting and Lining 1-1 PKG (25g Liquid, 35g Powder):-

A Strontium-based Glass Ionomer:-

 
All GC Gold Label Glass Ionomer contains strontium glass. The strontium glass provides good radiopacity and snapset characteristics, unanimously preferred by clinicians around the world. Interestingly, strontium will mimic calcium in the formation of strontium hydroxyapatite and strontium fluoroapatite to affect internal remineralization within the tooth structure.

Surface Strengthening Effect:-

 
Research has shown that a strontium-based glass ionomer placed in calcium-containing environment (saliva) will result in calcium ion diffusing into the glass ionomer surface achieving a surface strengthening effect. All GC Gold Label Glass Ionomer strengthens over time in saliva.

A Consistent Predictable Seal:-

 
All GC Gold Label Glass Ionomer will display a glossy surface after mixing. This indicates sufficient free polyacrylic acid is available to begin the ion exchange process. The subsequent movement of ions between dentin, enamel and GC Glass Ionomer creates an ion exchange zone which chemically fuses them together. The resulting seal is consistent, predictable and long lasting.

 

• No surface preparation or bonding agent required
•  High mechanical strength
•  Film thickness of just 15 microns
•  Easy post-operative checks

Packing :-
GC Gold Label 1 1-1 PKG (25g Liquid, 35g Powder)

 

How to Use Gold Label 1

• Mix to the correct powder:liquid ratio (20 seconds for Gold Label 1)
• Apply the mixed cement to both restoration and prepared tooth
• Seat the restoration within 30 seconds of completing the mix
• Remove the excess cement during the gel stage
• Total setting time is 4’30” after start of mix
• After final set, moisture proof the margin by applying a final coat of GC Fuji Varnish or GC Fuji Coat LC

• Cementation of stainless steel crowns and orthodontic bands
• Final cementing of metal or porcelain fused to metal crowns and bridges
• Lining under restorative materials

• No surface preparation or bonding agent required, yet have exceptional retention properties
• Biocompatible and with a tooth-like coefficient of thermal expansion maintaining the marginal seal
• Protection from secondary caries
• Sufficiently strong for routine luting and lining requirements
• Easier to mix resulting in an smooth ultra creamy mix
• Excellent flow and complete seating of the crown, bridge or orthodontic band and the ideal viscosity for lining
• Easy post-operative checks
• Less chairside stress for both patient and dentist
• More durable, longer lasting marginal seal
• Excellent radiopacity
• Long-term fluoride release

• Intrinsic chemical adhesion to both tooth structure and metal
• Glass Ionomer formulation
• Fluoride release
• High mechanical strength
• Excellent wetting properties
• Film thickness of just 15 microns
• Radiopaque
• Biocompatibility
• Sharp set characteristics
• Low solubility
• Long term clinical data

Product Details:

Product Description:-

• Used for fixed, stumps or bases in fixed and Co-Cr models.
• Excellent chip resistance, high definition of details, adequate working time and good dimensional stability.
• Compatible with all type of impression material.
• Colour: Azure Blue

Product Details:

Product Description :-Pyrax Kalabhai ultrarock die stone that produces a homogenous coating on the die stone and plaster attributed to its viscosity. This ultrarock die stone protects models against abrasion specifically at the marginal area which is most prone to breakage. The film does not disassociate from the die while building a wax pattern due to heating. it is a rapid setting and thereby reduces working time. Thus, it is the perfect choice for the users. This is long lasting and a quality product that serves for a very long time.

Product Details:

Product Description:-
Used for all types of prosthesis – fixed, stumps or removable. Good stacking properties and dimensional stability. Compatible with all impression materials.

Product Details:

PYRAX Kalabhai Lab Stone, 3Kg
Product Description:- 
Colour: Bright YellowType: Class lllWater/Plaster Ratio: 34ml/100gWorking time: 5 MinutesMixing Time: 15 secondsSetting Time: 7-10 MinutesSetting Expansion: 0.15%Comprehensive strengthAfter 1 hour: 220 kg/cm squareAfter 24 hour: 500 kg/cm square

Packaging:
1 x Lab Stone 3Kg

Product Details:

Product Details:

Product Detail

Silicone Impression Base putty is a very high viscosity two pastes addition reaction based soft elastomeric Impression Material with excellent hydrophilic properties, dimensional accuracy, high tear strength, and resistance to permanent deformation.

IMPRISIL Impressions are highly stable & can be stored up to 30 days and can be casted several time.

Light Body is an addition reaction based silicone impression materials for use in dentistry with automatic mixing device ( cartridge dispensing gun).

Light Body is a hydrophilic vinyl polysiloxane impression material for the production of extra ordinarily smooth and highly precision impressions for models, crowns, bridges and dentures.

Application

Silicone Impression Base Putty is designed to be used with Silicone Impression Material Light Body in a dual phase impression technique for Impression of crown or bridge, full denture, partial denture and Impression for relining and cavity impression of facing, inlay, onlay, etc.

Composition

Base Putty and Light body silicone impression material is a Quadra Functional Hydrophilic Addition Reaction Based Silicone.

Packing

A Type Silicone Impression Material Hand Mix Base Putty + Light Body

1. Silicone hand mix putty Base : 1 x 400 gms (300ml) + catalyst : 1 x 400 gms (300ml)
2. Silicone light body Base : 1 x 25 ml + catalyst : 1 x 25 ml ) 1 x 50 ml cartridge
3. 1x Plastic box
4. 10 x intraoral tips yellow
5. 10 x mixing tips yellow

Shelf Life

2 years from date of manufacturing.

Product Details:

Cavibond is a polymer reinforced Zinc oxide Eugenol cement for temporary restorations. Material have excellent physical properties because of polymer resin used as reinforcing agent. Cavibond is quick set, easy to mix with high compressive and tensile strength, excellent abrasion resistance and low erosion.

Application: Used as Intermediate Restorative Material (IRM) for class I and II cavities. Temporary restoration in emergency treatments and to seal the coronal portion of the teeth under endodontic treatment. Also used as base under amalgam and non-resin restorations.